? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded power inductors C lps5015 document 585-1 document 585-1 revised 12/05/08 dcr srf i sat (a) 5 i rms (a) 6 inductance 2 max 3 typ 4 10% 20% 30% 20c 40c part number 1 20% (h) (ohms) (mhz) drop drop drop rise rise lps5015-102ml_ 1.0 0.050 183 3.6 3.8 3.9 1.90 2.65 lps5015-132ml_ 1.3 0.065 150 2.5 2.6 2.8 1.70 2.35 lps5015-182ml_ 1.8 0.075 128 2.6 2.8 2.9 1.50 2.15 lps5015-222ml_ 2.2 0.090 116 2.4 2.6 2.7 1.40 2.00 lps5015-332ml_ 3.3 0.125 88 1.9 2.0 2.0 1.30 1.80 lps5015-472ml_ 4.7 0.150 73 1.6 1.7 1.8 1.20 1.62 lps5015-562ml_ 5.6 0.175 67 1.6 1.6 1.6 1.10 1.45 lps5015-682ml_ 6.8 0.225 57 1.3 1.4 1.5 0.90 1.25 lps5015-822ml_ 8.2 0.280 49 1.3 1.3 1.4 0.85 1.05 lps5015-103ml_ 10 0.300 44 1.2 1.3 1.3 0.80 0.95 lps5015-123ml_ 12 0.350 40 1.0 1.1 1.2 0.75 0.84 lps5015-153ml_ 15 0.360 38 0.80 0.84 0.86 0.73 0.84 lps5015-183ml_ 18 0.550 35 0.75 0.77 0.80 0.70 0.83 lps5015-223ml_ 22 0.675 31 0.70 0.73 0.75 0.60 0.82 lps5015-333ml_ 33 0.750 24 0.55 0.59 0.60 0.50 0.70 lps5015-473ml_ 47 1.00 18 0.46 0.48 0.49 0.45 0.57 lps5015-563ml_ 56 1.13 17 0.40 0.43 0.45 0.40 0.52 lps5015-683ml_ 68 1.45 15 0.33 0.38 0.39 0.35 0.47 lps5015-104ml_ 100 1.95 12 0.30 0.33 0.34 0.30 0.42 lps5015-124ml_ 120 2.50 10 0.25 0.28 0.30 0.27 0.37 lps5015-154ml_ 150 3.40 9.3 0.23 0.25 0.26 0.25 0.33 lps5015-224ml_ 220 4.50 7.3 0.20 0.21 0.22 0.22 0.29 lps5015-334ml_ 330 7.40 5.7 0.15 0.17 0.18 0.17 0.22 lps5015-474ml_ 470 7.50 4.9 0.12 0.12 0.13 0.16 0.21 lps5015-564ml_ 560 8.50 4.3 0.10 0.11 0.12 0.14 0.190 lps5015-684ml_ 680 10.6 4.0 0.10 0.11 0.11 0.13 0.175 lps5015-105ml_ 1000 15.0 3.2 0.080 0.090 0.093 0.10 0.150 lps5015-155ml_ 1500 25.0 2.5 0.080 0.086 0.088 0.090 0.140 lps5015-185ml_ 1800 28.0 2.2 0.078 0.083 0.086 0.085 0.130 lps5015-225ml_ 2200 36.0 2.1 0.072 0.078 0.080 0.065 0.090 lps5015-335ml_ 3300 55.0 1.7 0.064 0.072 0.076 0.055 0.075 lps5015-475ml_ 4700 80.0 1.4 0.062 0.069 0.072 0.045 0.065 ? very low dcr; excellent current handling ? 5.0 5.0 mm footprint; less than 1.5 mm tall designer?s kit c350 contains 3 each of all values core material ferrite core and winding loss see www.coilcraft.com/coreloss terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 102 ? 107 mg ambient temperature ?40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: ?40c to +125c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 1000/7 reel; 3500/13 reel plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth recommended pick and place nozzle od: 5 mm; id: 2.5 mm pcb washing only pure water or alcohol recommended 1. please specify termination and packaging codes: lps5015-335m lc termination: l = rohs compliant silver-palladium- platinum-glass frit. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: c =7 machine-ready reel. eia-481 embossed plastic tape 1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (3500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms using an agilent/hp 4192a. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 8753es or equivalent. 5. dc current that causes the specified inductance drop from its value without current. 6. current that causes the specified temperature rise from 25c ambient. 7. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering.
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded smt power inductors C lps5015 series document 585-2 document 585-2 revised 12/05/08 typical l vs current typical l vs frequency typical current derating 0.189 0.003 4,80 0,076 0.0551 0.004 1,4 0,1 winding direction dash number internal code xxx x 0.189 0.003 4,80 0,076 * * dimensions are of the case not including the termination. for maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. * 0.060 1,50 0.039 1,00 typ typ 0.039 1,00 0.197 5,00 0.134 3,40 recommended land pattern 0.060 1,50 0.138 3,50 0.197 5,00 45 typ 0.090 2,30 0.134 3,40 0.090 2,30 1 10 10000 1000 100 0.01 0.1 110 frequency (mhz) inductance (h) 10 h 3.3 h 33 h 1000 h 3300 h 330 h 100 h 1 10 10000 1000 100 0.01 0.1 110 current (a) inductance (h) 3.3 h 33 h 330 h 1000 h 3300 h 100 h 10 h -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) percent of rated current 120 110 100 90 80 70 60 50 40 30 20 10 0 i sat i rms 25c dimensions are in inches mm
|
